Call RDA Search

Blog

New Products Featuring ArcReach Technology

18 July, 19 9:36 am · Leave a comment · reddarc
Share
Facebooktwitterlinkedinmail
ex360 fieldpro rental welder with arc reach

EX360 FieldPro Multi-process Welder

ArcReach® technology is an investment that results in a lot of time saved during welding operations.  With most welding equipment the operator needs to walk back and forth to adjust output voltage – sometimes over hundreds of feet – multiple times during a job. This results in hundreds of wasted hours and thousands of lost dollars over the course of a large project.

ArcReach technology enables welders to adjust the voltage settings right at the point of welding

ArcReach technology enables welders to adjust the voltage settings right at the point of welding instead of walking all the way to the power source and back.  Even worse, if the voltage settings are “just good enough”, the operator might not bother making the trip, resulting in lower quality welds.

How Does Arc Reach Work?

With ArcReach®, the digital signal is carries voltage information via the weld cables. The connection happens automatically.   The ArcReach software in the power source receives the signals it receives from the remote accessory or wire feeder and adjusts the output as indicated by the operator.

New Red-D-Arc Welders With ArcReach®

Red-D-Arc is pleased to announce the launch of our own line of equipment enabled with ArcReach®technology.  The EX360 Fieldpro is an excellent machine for welding pipe in the field, working in shipyards or working across large distances and heights in the construction industry. Our D624K HO Diesel Engine Welder features infinite arc control which enables welding arc characteristics to be adapted for specific welding applications using stick welding, MIG and flux-cored welding techniques.

portable diesel generator rental unit

The Red-D-Arc D624K HO Portable Diesel Engine Welder

ArcReach Welding Accessories

We also carry the arc reach components needed to complete your ArcReach® enabled welding set up. The ArcReach® Suitcase 12 Wire Feeder is compatible with all ArcReach® enabled products and enables all the welding adjustments to be made at the point of welding.  The portable ArcReach® Stick-TIG Remote automatically changes to Stick mode if electrode positive polarity is detected or TIG mode when if electrode negative polarity is detected eliminating the need to walk back to the power supply.

Welders will benefit with more arc-on time and improved weld quality. Not only that, there won’t be extra control cables cluttering up the worksite, creating a trip hazard.  Faster, better, safer welding. ArcReach® technology is an investment you can’t afford to pass up.


Arc Reach Enabled Welding Equipment

EX360 FieldPro ArcReach Multiprocess Welder
D624K HO Diesel Welder with ArcReach
D325K 3+12 Diesel Engine Welder
Miller XMT 350 FieldPro Multiprocess
ArcReach Suitcase 12 Wirefeeder

Axxair Orbital System Makes Welding Small Pipes Easy

18 October, 18 3:12 pm · Leave a comment · reddarc
Share
Facebooktwitterlinkedinmail

multi pipe welded array
Welding small diameter tubing can be difficult.  The tight radii often require expert welders to deliver precise torch manipulation with finesse.  If the welder is not skilled enough, the out of position areas are at risk of poor quality due to gravity affecting the weld pool and ineffective torch angles.  If out of position welds cannot be completed satisfactorily, the part must be rotated.  However, some assemblies can’t be rotated because of size constraints or they might rotate off of center.  If a mechanized welding solution is desired for small diameter components, look no further than our Axxair Orbital Fusion Closed Welding Head Systems.


Closed-Head Pipe Welders

Axxair Orbital Fusion Closed Welding Systems are comprised of two main parts: the
Axxair Orbital Fusion Closed Welding Head
and the Axxair Orbital Inverter Power Supply.  The Orbital Fusion Closed Welding Head fully encompasses the assembly being welded.  This means that an inert gas environment can be created around the part, preventing it from the risk of oxidation that it might be exposed to during a welding operation that relies solely on a gas nozzle.  The Orbital Fusion Closed Welding Head also has a ring drive that enables full 360 degree motion around the weld joint, all the while keeping a consistent torch angle.  Furthermore, it is capable of going over 360 degrees for when slope-in and slope-out parameters are needed.
Closed Welding Heads

“The Orbital Fusion Closed Welding Head also has a ring drive that enables full 360 degree motion around the weld joint, all the while keeping a consistent torch angle.”

(more…)

AirGas Logo

Airgas, an Air Liquide company, is the nation's leading single-source supplier of gases, welding and safety products. Known locally nationwide, our distribution network serves more than one million customers of all sizes with a broad offering of top-quality products and unmatched expertise.