Call RDA Search

Blog

Red-D-Arc Turnkey Packages Support the World’s Largest Offshore Wind Farm

23 October, 17 11:23 am · Leave a comment · Taylor Stewart
Share
Facebooktwitterlinkedinmail

Red-D-Arc recently supplied a variety of equipment to a UAE based company that is fabricating pile piping and jackets for the largest offshore wind farm project in the world. The company had to meet a strict time line of only 6 months, and would require a massive amount of welding and weld automation equipment immediately. Through consultation with Red-D-Arc, the customer determined that renting the majority of the equipment would be the most economical option. Red-D-Arc was able to fulfil the customers equipment needs immediately thanks to our vast and diverse fleet of equipment.

This massive order involved equipment and support from Red-D-Arc North America, Red-D-Arc UK and Red-D-Arc Middle East. The order consisted of a variety of welding and weld automation equipment including:
• 23 column and booms with single and tandem submerged arc welders
• 20 submerged arc tractors
• 200 rotators
• 167 jack-up rotators
• 400 CC/CV inverter welders
• 200 FCAW wirefeeders
• 10 Induction Heating Systems

By renting the majority of the equipment the fabrication company avoided the need to invest heavily in specialized equipment and ensured they would meet their deadline. Red-D-Arc works with customers to address their unique challenges and develops specialized solutions. Learn more about customized turnkey packages here.

The 5 Most Common Mistakes Found by Welding Inspectors

10 August, 17 9:04 am · Leave a comment · reddarc
Share
Facebooktwitterlinkedinmail

welding-inspection-01Welding inspectors have a responsibility to the company they work for and the general public to ensure that weld quality is satisfactory.  Failure to fulfill their duties can result in property damage, injury, and death.  Most welding inspectors, therefore, take their job very seriously.  Welding inspectors spend years honing their ability to detect and size welding discontinuities and defects.  While they must be proficient at identifying all discontinuities and defects, some of these weld irregularities are more readily detectable than others.

1. Surface Porosity

Porosity is gas that has been trapped in the weld; this results in cavity formation within the weld.  Porosity can cause reduced weld strength.  Welding inspectors who are not trained in other forms of nondestructive testing are limited to viewing the surfaces of welds.  So while not all forms of porosity can be detected by a welding inspector, porosity that extends to the surface of the weld can.
(more…)

International Pipeline Conference & Expo

23 September, 16 8:35 am · Leave a comment · Geoff Campbell
Share
Facebooktwitterlinkedinmail

International

Red-D-Arc will be attending the International Pipeline Conference & Expo in Calgary – September 27-29, 2016. If you’re planning on attending, drop by booth #2101 and talk to our equipment specialists to learn more about how we support pipeline operations around the globe.

Red-D-Arc carries a wide range of equipment for the pipeline industry including induction heating equipment, pipe end prep, multi-process pipe welders, orbital welders and generators.

Visit the Conference website

Visit the Expo website

Map:  Hyatt Regency & Telus Convention Centre

Red-D-Arc Installs Weld Overlay Cladding Facility in Scotland

30 March, 16 11:41 am · Leave a comment · Geoff Campbell
Share
Facebooktwitterlinkedinmail

Red-D-Arc supplied equipment and installation services for a new weld overlay cladding facility in the west of Scotland for one of the leading global distributors of raw material for wellhead and completion equipment to the oil and gas industry. After discussions with the client, Red-D-Arc designed a solution to meet the specific needs of their project. It was determined that the new cladding facility would consist of six Compact Cladding Cells and four Butt Welding Stations.

“We regularly develop specialized solutions alongside our customers…”

Layout of the facility began with our experienced engineers installing the six Red-D-Arc Compact Cladding Cells. Each Compact Cladding Cell consists of an automated system controller, 2m x 1m cross slide, 3 tonne turntable with built-in slip ring for preheating, and a Miller power source. Next, the four Red-D-Arc Butt Welding Stations were installed. Each station consists of an automated system controller; 3m x 3m travelling column and boom; 300mm x 300mm oscillation slide; 3 tonne headstock, 2 travelling support pipe idlers and a Miller power source.


The Red-D-Arc Weld Automation team has extensive experience across diverse sectors of industry. We regularly provide weld process recommendations and develop specialized solutions alongside our customers to address their unique challenges. Red-D-Arc Weld Automation Systems are designed for optimized reliability and productivity, and come complete with installation, onsite training, services and support.

Featured Product: Millermatic 252 – The welder that you can teach anyone to weld with

11 February, 16 4:10 pm · Leave a comment · Colin Brown
Share
Facebooktwitterlinkedinmail

Miller 252 Welder The Millermatic 252 —sometimes referred to as the Miller 252— is an extremely popular and easy to use welder. You only need to see the reviews quoted on Miller’s product site to see how much those who use this welder like it. It can be used for metal fabrication, maintenance and repair, farm and home use as well as light industrial applications.
Capable of MIG (GMAW), Wirefeed, and Flux-Cored Welding (FCAW),this machine employs Active Arc Stabilizer technology which creates consistent power output resulting in better quality welds. The push/pull gun connects directly to the unit with no extra module required in between.
Review - millermatic 252 welder
The unit detects the gun automatically and recalls the voltage, wire feed speed and timer of the active gun. There’s a panel on the front of the unit with a quick-reference parameter chart so you can quickly apply the correct settings for the consumables you are using. This welder has the highest output in its class (250 A at 28 VDC) allowing longer welding times on high-end applications. This is a very popular unit, praised for its ease of use by people who are learning to weld, hobbyists and others for whom welding is only one of many tasks they perform in a day. One user says that he taught his entire family to weld using this machine, including his 57 year old mother. Feature rich, well thought out, and easy to use, you would be hard pressed to find a better welder than the Millermatic 252.

Interested in renting one? Request a Quote.

See the Millermatic 252 in Action

AirGas Logo

Airgas, an Air Liquide company, is the nation's leading single-source supplier of gases, welding and safety products. Known locally nationwide, our distribution network serves more than one million customers of all sizes with a broad offering of top-quality products and unmatched expertise.