Quality Assurance (QA) is a set of defined processes for systematic monitoring and evaluation to assure product quality.
Quality Control (QC) is the process of confirming that the product meets the specifications. It includes the checking and testing of manufacturing procedures as well as the final products. The results from these tests are compared with a set of defined acceptance criteria. By carrying out QC testing during manufacturing, defects can be identified in a timely manner, allowing for the product flaw to be rectified and if required, adjustments to be made in the manufacturing process to prevent further defective output.
In welding, QA/QC plays a vital role in ensuring sound and reliable welds are produced and in minimizing rework.
Inspection, Surface Prep and Non-destructive Testing
Are you in the oil & gas industry? Are you involved in non-destructive testing, inspection, or surface preparation? How about maintenance of pipelines, heat exchangers, or pressure vessels? If you deal with these or similar operations, proper cleaning of surfaces might well be a process you regularly undertake.
Cleaning Delicate Equipment Safely
What is the best way to clean surfaces of such equipment? While there is no one best way for every circumstance, dry ice cleaning is a state-of-the-art method that can save time and money. It uses recycled CO2 in the form of solid dry ice particles as the cleaning media. Dry ice is soft and non-abrasive to most surfaces and can thus be used around delicate components, including electronics, that would be damaged by water or solvents. As the blasting equipment is portable it can be used in place, thus minimizing disassembly and other preparation time. Lastly, dry ice turns to a gas after contact with the surface being cleaned — cleanup time is rock bottom minimum, there is nothing to dispose of, contamination of moving parts is not an issue.
An oilfield equipment and vessel manufacturer in the United Arab Emirates approached Red-D-Arc for assistance with a large project. It was awarded to them at the last minute and was not their primary area of expertise. The requirement was to manufacture 25 large tanks with a timeframe of only one year. Each of the tanks was to be 5 meters in diameter by 25 meters long, manufactured using 16 millimeter thick material at a weight of approximately 45 tonnes.
The experienced Red-D-Arc Weld Automation team was able to immediately address all of the customer’s challenges. While other suppliers where insistent that the customer purchase the equipment, Red-D-Arc determined that long term rental would be their best option. This would avoid the time consuming process of acquiring CAPEX approval to purchase such a large amount of equipment and would further increase the profitability of the project. The manufacturer also had questions on how to avoid ovality and transverse movement of the sub-assemblies. Red-D-Arc experts were on-hand to provide the right advice and the right equipment to address these challenges.
The rental equipment included:
• 6x 10 tonne turning roll sets
• 10x 60 tonne drive rolls
• 47x 30 tonne and 60 tonne idler rolls
• 7x submerged arc packages with LT7 tractors and DC600 power sources
Red-D-Arc worked very closely with the company to ensure their success, providing comprehensive training and on-site assistance. After the successful completion of this project the company has become recognized in their market and are receiving new orders from similar customers in the industry. Furthermore, they anticipate being awarded “phase 2” of this project which is scheduled to begin in 2018.
Tank Fabrication Equipment
Red-D-Arc carries a variety of equipment useful for the construction and maintenance of storage tanks including:
A metal fabrication company located in Charlotte, North Carolina received an order for 300 small I.D. vessels for titanium molds. At the time they were using FCAW and back gouging the inside and outside of the vessels to achieve 100% penetration. On average they were producing 2 vessels per hour with 2 welders.
They reached out to Red-D-Arc to find a faster and more efficient way to produce these vessels. After discussions with Red-D-Arc the fabricator decided to purchase a turnkey submerged arc system. The custom designed system came complete with a small I.D. sub arc welding head mounted on a 9’x9′ manipulator, flux recovery system, NA5R automatic wire feeder, DC600 multi-process welder and 5 ton turning rolls. The system also included a laser and camera for precise control and monitoring of the submerged arc welding process.
The submerged arc system increased productivity by 250%. They were able to produce 5 cans per hour with half the labor cost. The safety of the work place was also significantly increased for a number of reasons:
• Back gouging was eliminated which in turn reduced the risk of fire
• Turning rolls replaced manual rotation of the vessels on tables
• Welders no longer had to weld inside the confined space of the vessels
The customer and the Red-D-Arc team were beyond pleased with the results. The customer plans to purchase two more of these systems for future projects.
Submerged arc welding can increase the efficiency and quality of many industrial welding projects regardless of the size or complexity. Red-D-Arc has all the equipment, expertise and experience to provide you with a submerged arc system to fit your needs – available for sale, lease and rent
Read more on welding efficiency
MacAljon, an industrial general contracting firm, has increased the productivity of its thin-wall tank manufacturing operation by more than 50% using the Red-D-Arc RDA MFUB-TW (fit-up bed for thin-wall cans). Fit-up time has been decreased by 20% and the use of spider bracing is no longer required. With no spider bracing to get in the way, a manipulator is now used to perform SAW ID circumference welding which has increased productivity by 30%.
The RDA MFUB-TW system is specially designed for the construction of thin-wall vessels ranging in size from 10′ to 15′-6″ in diameter (custom sizes are available). Our patented system is fitted with independently-adjustable vertical-rolls to support, align and compensate for tank non-concentricity when assembling multiple thin-wall sections which eliminates the need for spider bracing.
If you work with vessels that require the use of spider bracing or that have a wall thickness of between 3/16 – 3/8″ contact the Red-D-Arc sales team to learn more about the RDA MFUB-TW and how it can increase the productivity of your thin-wall tank manufacturing operation.
Read more about the RDA MFUB-TW here.