A metal fabrication company located in Charlotte, North Carolina received an order for 300 small I.D. vessels for titanium molds. At the time they were using FCAW and back gouging the inside and outside of the vessels to achieve 100% penetration. On average they were producing 2 vessels per hour with 2 welders.
They reached out to Red-D-Arc to find a faster and more efficient way to produce these vessels. After discussions with Red-D-Arc the fabricator decided to purchase a turnkey submerged arc system. The custom designed system came complete with a small I.D. sub arc welding head mounted on a 9’x9′ manipulator, flux recovery system, NA5R automatic wire feeder, DC600 multi-process welderand 5 ton turning rolls. The system also included a laser and camera for precise control and monitoring of the submerged arc welding process.
The submerged arc system increased productivity by 250%. They were able to produce 5 cans per hour with half the labor cost. The safety of the work place was also significantly increased for a number of reasons:
• Back gouging was eliminated which in turn reduced the risk of fire
• Turning rolls replaced manual rotation of the vessels on tables
• Welders no longer had to weld inside the confined space of the vessels
The customer and the Red-D-Arc team were beyond pleased with the results. The customer plans to purchase two more of these systems for future projects.
Submerged arc welding can increase the efficiency and quality of many industrial welding projects regardless of the size or complexity. Red-D-Arc has all the equipment, expertise and experience to provide you with a submerged arc system to fit your needs – available for sale, lease and rent
Red-D-Arc recently supplied a variety of equipment to a UAE based company that is fabricating pile piping and jackets for the largest offshore wind farm project in the world. The company had to meet a strict time line of only 6 months, and would require a massive amount of welding and weld automation equipment immediately. Through consultation with Red-D-Arc, the customer determined that renting the majority of the equipment would be the most economical option. Red-D-Arc was able to fulfil the customers equipment needs immediately thanks to our vast and diverse fleet of equipment.
This massive order involved equipment and support from Red-D-Arc North America, Red-D-Arc UK and Red-D-Arc Middle East. The order consisted of a variety of welding and weld automation equipment including:
• 23 column and booms with single and tandem submerged arc welders
• 20 submerged arc tractors
• 200 rotators
• 167 jack-up rotators
• 400 CC/CV inverter welders
• 200 FCAW wirefeeders
• 10 Induction Heating Systems
By renting the majority of the equipment the fabrication company avoided the need to invest heavily in specialized equipment and ensured they would meet their deadline. Red-D-Arc works with customers to address their unique challenges and develops specialized solutions. Learn more about customized turnkey packages here.
Red-D-Arc UK delivered and installed a new vertical cladding facility for a manufacturing facility in Doha, Qatar. Red-D-Arc’s logistics team arranged for the equipment to be air-freighted to the new manufacturing facility in Qatar where Engineers awaited the arrival to begin installation.
The installation consisted of a Red-D-Arc automation controller, 4×4 manipulators, 2×1 cross-sides and a 20 ton floor turntable. This took Red-D-Arc engineers only three days to fully install and weld test. They were able to begin on-site training shortly after.
MacAljon, an industrial general contracting firm, has increased the productivity of its thin-wall tank manufacturing operation by more than 50% using the Red-D-Arc RDA MFUB-TW (fit-up bed for thin-wall cans). Fit-up time has been decreased by 20% and the use of spider bracing is no longer required. With no spider bracing to get in the way, a manipulator is now used to perform SAW ID circumference welding which has increased productivity by 30%.
The RDA MFUB-TW system is specially designed for the construction of thin-wall vessels ranging in size from 10′ to 15′-6″ in diameter (custom sizes are available). Our patented system is fitted with independently-adjustable vertical-rolls to support, align and compensate for tank non-concentricity when assembling multiple thin-wall sections which eliminates the need for spider bracing.
If you work with vessels that require the use of spider bracing or that have a wall thickness of between 3/16 – 3/8″ contact the Red-D-Arc sales team to learn more about the RDA MFUB-TW and how it can increase the productivity of your thin-wall tank manufacturing operation.
Read more about the RDA MFUB-TW here.
Red-D-Arc designs and builds complete turnkey weld automation packages for your complete project requirements. Our team of engineers and designers develop specialized solutions alongside our customers. We’ll provide you with weld process recommendations and set up all your equipment for optimized reliability, functionality and productivity.
The Red-D-Arc Weld Automation team has extensive industry experience which includes hundreds of special and turnkey installations provided to diverse sectors of industry such as Oil Exploration and Refining, Nuclear Industries, Aerospace, Defense, Steel Mills, Mining and Wind Tower Manufacture. From small positioners for integration with welding robots to 500 tonne capacity positioners with unique HMI controls complete with onsite training, services and support.