Call RDA Search

Blog

Welding Stainless Steel – Hints and Guidelines

15 January, 19 9:42 am · Leave a comment · Colin Brown
Share
Facebooktwitterlinkedinmail

Welding of Stainless Steel

Stainless steel contains a minimum of 10.5% chromium which imparts it corrosion resistance by forming an oxide layer on the surface. The most common stainless steel is the austenitic type (300 series) which contains chromium and nickel as alloying elements. Other types include ferritic, martensitic and duplex stainless steels. Most stainless steels are considered to have good weldability characteristics. Most common processes used for welding stainless steel are TIG (GTAW) and MIG (GMAW). But, stick welding (SMAW) is also utilized.

Differences in Properties:

The properties of stainless steel differ from mild steel, and these differences need consideration when welding as below:

  • Higher coefficient of expansion, 50% more for austenitic – this results in more distortion
  • Lower coefficient of heat transfer – welding requires lower heat input as it is conducted away slowly
  • Lower electrical conductivity – using the correct and consistent stick-out distance is more critical when using MIG/TIG, higher wire speed for the same current is required when MIG welding

(more…)

AirGas Logo

Airgas, an Air Liquide company, is the nation's leading single-source supplier of gases, welding and safety products. Known locally nationwide, our distribution network serves more than one million customers of all sizes with a broad offering of top-quality products and unmatched expertise.